EV/PHEV and EVSE Vehicle charging sockets

Elma 2200X is a re-invention of the voltage tester- again. Elma 2200X offers all the same and clever functions as the well-known Elma 2100X, but the test leads and instrument are en even more rugged quality. Furthermore the instrument can load the point of measurement, to discharge induced voltages, and for simple RCD test, providing a load of 30mA at 230V.

We've never seen so many clever functions in a simple voltage tester, making the instrument suitable for about every task an electrician meet, also when legislation demands to use a tester in compliance with the voltage tester directive.

• Perfect for measuring on charging sockets and charging stands EVSE for electric cars
• Voltagetest, 2 pole with LED 12…1.000V AC/DC
• Voltage measurement with digital display 6…1.000V/1.500V AC/DC
• Continuity
• Resistance 0-1999Ω
• Single pole phase test
• Phase rotation test
• Large and bright display and bright LED's
• Selftest and auto on/off function
• LED warning when dangerous voltage
• Fulfills voltage tester directive
• Very rugged test leads
• Changeable test tips 2/4mm
• Bright torch light

Elma 2200X fulfills IEC 61010-1 KAT IV 600V / IEC 61243-3:2014 and is provided ready to use with batteries and manual.

Elma 6100EVSE is a solid true RMS AC/DC mini multimeter with Bluetooth function. The instrument measures current, voltage, frequency, capacity, resistance, and continuity. In addition, the instrument is equipped with a special area for external current clamp. It can measure up to 3000A with flex clamp (ElmaFlex 430).

The unique EVSE function in the Elma 6100EVSE also converts the CP signal from the EVSE charging socket for electric cars directly into an ampere value. If it is used e.g. with the Elma EVSE-200 (available as an accessory on this page), the CP DutyCycle signal from the charger can be read directly as amperes, instead of the classic Hz% signal. So, set e.g. The Elma EVSE-200 CP switch on 32A, which simulates that the car is "asking" for 32A, and read the electric car charger's response to what it can offer, directly as e.g. 16A.

With the Bluetooth function and the free APP Elma Link, which is available for both iOS and Android, the Elma 6100BT becomes a safe and smart documentation tool. See your display directly on your Android/iOS device and take measurements at a safe distance from dangerous voltage. View and record all values, curves, directly on the phone. You can save and attach images with comments and share e.g., through e-mail.

Elma 6100EVSE has a large, illuminated display and is equipped with a powerful LED flashlight, data hold max/min and auto power off. The instrument meets EN61010-1 CAT III 600 V standards and is supplied with test leads, batteries and a manual.

Elma BM257s is a new smart mini multimeter with two new intelligent functions. Autocheck is an intelligent function which automatically detects and chooses AC voltage, DC voltage, continuity and resistance scale. All you have to do is turn on the instrument and measure. Low Z is a way to measure voltage with low impedance. This means that the measured object is tested under load, securing that the correct voltage is measured.

The instruments build-in contact free detection of energy fields can be used for contact free detection of magnetic fields from computer screens and voltage detection. Elma BM257s measures in true RMS current, voltage, frequency, capacity, continuity and temperature.

Elma BM257s has displaylight with analog bargraph for easy and fast reading. The instrument is equipped with automatic and manual range, relative range, peak hold, min/max, datahold and auto power off. With PC communication and the Windows software (accessories) it is possible to record data in real time to a PC.

The instrument is very safe and robust, and secured against fail handling with hi efficient fuses. The instrument complies with IEC 61010-1 CATIII 600V / KAT IV 300V and is delivered complete incl. rubber housing, test leads, temperature probe (-50°C - +250°C) batteries and user manual.

Elma DT5500A is a new smart multimeter combined with an insulation tester with superior resolution. The instrument is rugged and fitted with large, easy to read illuminated display with smart analog bar chart.

The multimeter measure AC / DC voltage, resistance and 200mA continuity. The insulation teste has optional test voltages 125, 250, 500 and 1000V, and lockable test function. Elma DT5500A have automatic discharge of capacitive voltage and automatically warns of dangerous voltage if attempting to perform an insulation test on live installations. The instrument has automatic range selection, data hold and min / max measurement.

Elma DT5500A is equipped with integrated rubber protection casing and meets IEC CAT III 1000V / CAT IV 600V. The instrument comes complete in bag incl. test leads, batteries and instructions.

Elma BM789 is a slim multimeter with a high bandwidth of 100kHz and true RMS measurements. Auto Check is an intelligent function that automatically detects and selects AC voltage, DC voltage and throughput test / resistance. All you have do is turn on the instrument and measure. Low Z is voltage measurement with low impedance, meaning that the measuring point is loaded and thus it is ensured that the real voltage is measured, and any induced voltage is discharged. In addition, the Elma BM789 has advanced VFD (Variable Frequency Drive) function, which means that it can measure accurate voltage according to e.g., frequency converters.

The instrument has built-in non-contact detection of electric fields, which i.a. can be used to detect electromagnetic fields from computer monitors or as a non-contact pole finder. Elma BM789 measures i.a. true RMS current, voltage, resistance, frequency, capacitance, throughput, temperature and much more.

Elma BM789 has an illuminated display with analog bargraph for easy and fast reading. The instrument is equipped with automatic / manual range selection, relative measurement, Peak hold, min / max, data hold and intelligent auto power off.

The instrument is very safe and solid, despite the sleek design. It is equipped with highly efficient fuses and complies with IEC 61010-1 CAT III 1000V & CAT IV 600V for maximum safety. Elma BM789 is incl. rubber jacket, test leads, temperature sensor (wire sensor -50 to + 250 ° C), battery and Danish operating instructions.

Elma EVSE-200 activates the charging point (EVSE), by simulating the connection of an electric vehicle (EV). Furthermore it provides the measuring points to standard banana sockets. The adapter itself can then perform a simple functional test, if charge point is activated, and full installatino test can be performed with any installation tester MFT, as the Elma EVSE-200 is universal.

Furthermore the EVSE-200 provides seve

Elma EVSE-200 activates the charging point (EVSE), by simulating the connection of an electric vehicle (EV). Furthermore it provides the measuring points to standard banana sockets. The adapter itself can then perform a simple functional test, if charge point is activated, and full installatino test can be performed with any installation tester MFT, as the Elma EVSE-200 is universal.

Furthermore the EVSE-200 provides several other clever functions:

CP signal to bananaplugs. EVSE and EV communicates throug Hz% modulated 1kHz square pulse signal. This signal can be read out throug the standard banana sockets in the adapter.

Elma EVSE-200 can also be connected to a load, like an electric heater, and carry a load of 10A, from the Schuko socket in the adapter. Thus the chrange point can be put under load for testing and trouble shooting, e.g.  by one of our infrared cameras.

Elma EVSE-200 can also simulate faults, lige missing PE, CP-PE short etc. to test functions in the charger like auto reset.

The adapter is ready to use in nylon carry bag, including type 2 plug, simple turn-knob setting for PP (Load request) and CP (connection status) for ventilated (ABD) and un-ventilatet (ABC) chargers. The adapter is universal and can be used with any installation testers or any other electrical tester.

ral other clever functions:

CP signal to bananaplugs. EVSE and EV communicates throug Hz% modulated 1kHz square pulse signal. This signal can be read out throug the standard banana sockets in the adapter.

Elma EVSE-200 can also be connected to a load, like an electric heater, and carry a load of 10A, from the Schuko socket in the adapter. Thus the chrange point can be put under load for testing and trouble shooting, e.g.  by one of our infrared cameras.

Elma EVSE-200 can also simulate faults, lige missing PE, CP-PE short etc. to test functions in the charger like auto reset.

The adapter is ready to use in nylon carry bag, including type 2 plug, simple turn-knob setting for PP (Load request) and CP (connection status) for ventilated (ABD) and un-ventilatet (ABC) chargers. The adapter is universal and can be used with any installation testers or any other electrical tester.

Elma 9400 is an unique instrument, combining AC and DC leakage- and milli amp measurements. Furthermore Elma 9400 offers standard multimeter functions.

Elma 9400 is indispensable for automotive, electronics and electrical installation, combining high resolution AC and DC leakage measurements. This means that Elma 9400 can be used for many purposes. Find the part of the car discharging the battery with DC, or the traditionel AC leakage in the switch board with shuts off the RCD or the DC component from the electronics, dangerously diabling RCD functionality. Elma 9400 can also be used to measure charinging currents on small DC charging circuits, battert loads and small loads like e.g. the light in the car. Elma 9400 clamp multimeter covers it all.

Elma 9400 measures 0,1mA…10,00A DC and 0,1mA…20,00A AC and is provided with standard DMM functions like voltage- and resistance measurement. The instrument fulfills CAT IV and is delivered ready to use with bag, batteries, testleads and manual.

Elma BM878 is a genuine TRMS multimeter with built in insulation tester. The insulation tester offers 5 different test voltages and furthermore the instruments offers 200mA continuity test to measure protective bonding.

Elma BM878 is provided with large backlit display and fast analogue bargraph. The instrument measures in true RMS, voltage, current, frequency, resistance, capacity, diode, continuity and temperature. Elma BM878 got a lot of additional features like max/min/hold, auto power off, auto/manual range and VFD filter to measure true values after frequency drives.

The instrument fulfills EN61010-1 CAT IV 600V and is delivered ready to use including remote for insulation test, test leads, batteries, type-K temperature probe and manual.

This is a smart kit that combines the unique CP load reading from the Elma 6100EVSE with the charging station activation function of the Elma EVSE-200

Elma 6100EVSE is a solid true RMS AC/DC mini multimeter with a Bluetooth function. The instrument measures current, voltage, frequency, capacity, resistance, and continuity. In addition, the instrument is equipped with a special area for external current clamp and the possibility of measuring up to 3000A with flex clamp (ElmaFlex 430).

The unique EVSE function in the Elma 6100EVSE also converts the CP signal from the EVSE charging socket for electric cars directly into an ampere value. If it is used e.g., with the Elma EVSE-200 (available as an accessory on this page), the CP DutyCycle signal from the charger can be read directly as amperes, instead of the classic Hz% signal. E.g. put the Elma EVSE-200 CP switches on 32A, which simulates that the car is "asking" for 32A, and read the electric car charger's response, directly as e.g., 16A.

With the Bluetooth function and the free APP Elma Link, which is available for both iOS and Android, the Elma 6100BT becomes a safe and smart documentation tool. See your display directly on your Android/iOS device and take measurements at a safe distance from dangerous voltage. View and record all values, curves, and graphs directly on the phone. You can save and attach image and comment on the measurement. You can share these on e-mail.
Elma 6100EVSE has a large, illuminated display and is equipped with a powerful LED flashlight, data hold max/min and auto power off. The instrument meets EN61010-1 CAT III 600 V standards and is supplied with test leads, batteries, and a manual.

The Elma EVSE-200 adapter activates the charging station by simulating the connection of an electric car, and brings measurement points out into standard banana sockets. This way a simple function test whether stand can be activated is done with adapter alone, voltages can be measured with standard multimeter or full function test and installation test is done with a suitable installation tester.

Elma EVSE-200 also has several smart functions.
CP signal in banana sockets. An EVSE charger and electric car EV communicate via a frequency-modulated signal. Then the car (Elma EVSE-200) asks for e.g., about 32A, the charging plug may respond that 13A is available. This signal can be read with a standard multimeter with DutyCycle Hz% function, or with the ground-breaking Elma 6100EVSE, which directly displays the signal as a current. Find Elma 6100EVSE as an accessory on this page.

Elma EVSE-200 can also be connected to a load, e.g., a heating fan, up to 10A, directly into the socket on the adapter. This way, the charging plug can be tested under load, and connections can be checked with an infrared camera.

Elma EVSE-200 can also do fault simulation for missing PE connection and CP to PE fault. Thus, the adapter can only be used to check correct connection and functionality in the event of a fault.

The adapter is supplied with a standard type 2 plug and simple rotary switches for simulating both PP (load) and CP (Connection status) both vented (ABD) and non-vented (ABC) status. Delivered ready for use in a bag and can be advantageously used with installation testers from Elma instruments.