Products

Fuse 6x32mm, 10kA/1000V for e.g. Elma BM2805

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

The original and still the best, Volt Stick is an instant tester for safely checking the presence of an AC voltage, without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct operation. The red indicator in the tip will illuminate on detection of AC voltage simply by applying the tip close to any connection point, or moving it along any insulated cable.– Locates breaks in cables
– Detects blown fuses inside plugs or fuse holders
– Distinguishes between live and neutral wires in both single and three-phase supplies
– Identifies voltage-carrying cables in junction boxes
– Locates defective in-series light bulbs
Voltage range:230-1000V AC

Response Time:Immediate

Batteries:2 x 1,5V AAA (supplied)

Relative Humidity:80% @ 30°C, 50% @ 40°C

Operating Temperature:-20 ~ +50°C

Overvoltage:CAT III 1000V AC

Dimensions / Weight:145(L) x 18(Ø) mm / 35g (incl. batteries)

Elma 106 VoltStick® indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 VoltStick® is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 VoltStick® meets EN 61010-1 CAT IV 1000V and comes complete incl. guidance and batteries.

For more than 30 years ago Sagab Electronics AB invented the VoltStick® Phasen, making it possible, for the first time ever, to detect and indicate voltage without contact. Now we’re ready to launch the innovative and new VoltStick® Bright. Microprocessor controlled and highest available safety class for clever voltage detection. VoltStick® Bright is always on and ready for use and is the first voltage detector with integrated self test and battery test capability, making it the safest choice for the user, when detecting voltage. Furthermore the VoltStick® Bright is equipped with extremely bright and visible red LED tip and loud and clear acoustic warning when detecting voltage. It doesn’t get any safer, nor easier. The build in LED flashlight illuminates the measuring area in a bright white light while measuring. VoltStick® Bright offers two user selectable ranges, easily changed on the pushbutton. This makes it possible to detect voltage from as low as 20V to 1000V AC. The probe tip is designed to fit into any kind of socket, worldwide and the slim design makes VoltStick® Bright ideal to bring everywhere, even in the pocket of your shirt. VoltStick® Bright is supplied including batteries, multi language manual, is UL and CE approved complying with IEC 1010-1 Cat IV 600V.

Sagab by Elma 900 is a handy safety voltage tester with smart design features. The instrument has a clear LED indication of relevant voltages and automatically polarity indication. The test probes have both 2 and 4mm diameter test tips, which ensures good connection in all types of sockets. Sagab by Elma 900 meets IEC 61010-1 CAT III 400V and CAT II 400V.

– LED voltage indication from 12-400V AC/DC
– Interchangeable 2 and 4mm testprobes
– Meets IEC 61010-1 CAT III 400V

LED voltage range:12, 24, 50, 120, 230, 400V AC/DC
LED resolution:±12, 24, 50, 120, 230, 400V AC/DC
ACV frequency range:50/60Hz
Internal basic load:Approx. 10W at 400V
Peak current:1s<0,2A/ (5s <3,5mA)
Dimensions:240 x 45 x 26mm
Weight:125g

Elma Magnet Stick is a small and smart "Pen-tool" for test of magnetism without metallic contact. Elma Magnet Stick is held against the test point and will light with up in a clear and strong red light, if a magnetic field is present. Indispensable for testing: - Pneumatics and hydraulics - Oil and gas burners - White goods and machinery Elma Magnet Stick provides easy and safe testing, without coming into contact with live wires. Supplied incl. batteries and test magnet.

Elma VoltStick® Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma VoltStick® Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma VoltStick® Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards.

Elma MagnetStick® is a small and clever "Pen-tool" for test of magnetism without metallic contact. The tip of Elma MagnetStick® is simply placed close to the test point and will light in clear red light, if a magnetic field is present. Indispensable for testing: - Pneumatics and hydraulics - Oil and gas burners - Appliances and white goods

MagnetStick® Stick provides easy and safe testing, without contact with live circuits. Supplied ready to use incl. batteries and test magnet.

PVF2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

To facilitate connection and disconnection, the MC4 connector is without a locking mechanism.

PVF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVM2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

PVM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

The Elma Toolbag is a high-quality bag made of durable nylon, with space for both measuring equipment and tools. The bag is spacious and can be used for items like the Elma Laser X360-3 KIT, which includes both a line laser and a tripod, while still leaving plenty of room for other measuring equipment or tools.