Clampmeters AC

TM-12E is a small clampmeter in a smart design.

The instrument measures current, voltage, frequency, resistance and continuity easily and quickly.

TM-12E has automatic range selection, data hold, auto-off and 3 ¾ digit display with bar graph.

The instrument is delivered ready to use in a pouch with test leads, instructions and batteries.

Elma BM031 is a handy and small clamp multimeter that measures True RMS AC current. Using the instrument it is possible to measure currents as high as 600A AC and the multimeter function provides measurements of voltage, resistance and continuity. The AmpTip function offer the possibility to measure current from 0-60A with extra high accuracy.

Elma BM031 is equipped with back lit display, min/max/rel, datahold peak hold and voltage detection. Elma BM031 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is provided ready to use in bag incl. test leads, battery and user manual.

The small body and jaw fit perfectly in your hand and into tight places. Meter controls are positioned so that current measurements can be done with one hand. A large backlit display is easy to see and a handy Display Hold keeps measurements on the display. The clamp multimeter measures voltage, current, resistance and continuity. The instrument meets IEC 61010-1 CAT III 600V and is supplied in carrying case with test leads and battery.– 400A AC current measurement
– 2000 counts backlit LCD
– Auto Power off and Low Battery display
– Data and max hold mode
– Non-contact AC voltage detecting function

Current:0-2-20-400A AC
Voltage:0-600V AC/DC
Resistance:0-20MΩ
Continuity:
Acoustic signal by Resistance < 150 Ω
Diode test:Open Voltage 1.5V
Jaw opening:30 mm
Display:2000 counts, 3 1/2 digit
Batteries:1 x 9V 6F22 (supplied)
Dimensions / Weight:197 x 70 x 40mm / 183g (including batteries)

Elma reinvents the voltage tester, once again, with Elma 2700X.

Elma 2700X has all the same smart features as you know from the Elma x-one, but comes with fixed test leads in extra strong quality, in contrast to the x-one's detachable and extremely thin and flexible cables. In addition, the instrument housing is in a stronger and more solid design, just as you can "feel" the voltage, as Elma 2700X vibrates when measuring voltage.

There have never been so many smart and thought through features in one Instrument. Elma 2700X is a smart multi-tester that combines the voltage tester with an open current clamp, which makes the instrument suitable for most electrical tasks, L-AUS work and detection of voltage-free condition, where it is mandatory to use an instrument that complies with the voltage tester directive.

• Perfect for measuring on charging sockets and charging stands EVSE for electric cars
• Voltage test, 2 poles with LEDs 120… 1,000V AC / DC
• Voltage measurement with digital display 1… 1,000V / 1,500V AC / DC
• Current measurement with slim current clamp 0-200A
• Review test
• Resistance measurement 0-100kΩ
• Pole finder, one-pole voltage test which indicates the phase
• Phase sequence / turn field test, 2 poles for 3 phase networks
• Large clearly lit display and high-efficiency LEDs
• Self-test and auto on / off function
• Diode warning in case of dangerous voltage without battery - for L-AUS work
• Complies with the voltage tester directive for checking the de-energized state
• Very powerful fixed wires with
• Interchangeable test tips 2 / 4mm
• Built-in powerful flashlight
• Delivered including delicious belt bag

Elma 2700X complies with IEC 61010-1 CAT IV 600V / IEC 61243-3: 2014 and comes with batteries, test leads, instructions and smart belt bag.

With Elma X One, Elma is reinventing the voltage tester. Never have there been so many smart and well though out functions in one instrument. Elma X One is a smart true RMS multitester which combines the voltage tester with open current clamps in a very slim design. Suitable for work with the power on.

• Perfect for measuring on charging sockets and charging stands EVSE for electric cars
• Voltage test, 2 pole with LEDs 12...1.000V AC/DC
• True RMS voltage measurement with display 7...1.000V AC/DC
• True RMS current measurement with very slim cucrrent clamps 0-200A
• Resistance measurement 0-50kΩ and continuity test
• Voltage test, 1 pole, indicating phase
• Phase rotation test, 2 pole
• Large clear illuminated display and bright LEDs
• Self-test and auto on/off function
• True voltagetest also without batteries - suitable for work with the power on
• Meets the voltage tester directive for working with the power off
• Very powerfull interchangeable test leads with 4mm standard plug
• Interchangeable test leads tips 2/4mm
• Built-in powerful flashlight
• Comes with handy bag for the belt

Elma X One complies with IEC 61010-1 Cat IV 600V / IEC 61243-3:2014 and comes complete with batteries, test leads, manuel and handy bag
 

Elma 3039 is a true RMS clamp meter in a very handy design for easy measuring of AC & DC currents. The instrument has a resolution down to 10mA, a large backlighted display, data hold and automatically zero-adjustment. Elma 3039 has low pass filter and ”Inrush” for measuring Inrush currents (peak currents on motors). With the ”Volt sense” function voltage can be detected without any contact. The instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteries and manual.

Elma 9400 is an unique instrument, combining AC and DC leakage- and milli amp measurements. Furthermore Elma 9400 offers standard multimeter functions.

Elma 9400 is indispensable for automotive, electronics and electrical installation, combining high resolution AC and DC leakage measurements. This means that Elma 9400 can be used for many purposes. Find the part of the car discharging the battery with DC, or the traditionel AC leakage in the switch board with shuts off the RCD or the DC component from the electronics, dangerously diabling RCD functionality. Elma 9400 can also be used to measure charinging currents on small DC charging circuits, battert loads and small loads like e.g. the light in the car. Elma 9400 clamp multimeter covers it all.

Elma 9400 measures 0,1mA…10,00A DC and 0,1mA…20,00A AC and is provided with standard DMM functions like voltage- and resistance measurement. The instrument fulfills CAT IV and is delivered ready to use with bag, batteries, testleads and manual.