PV Measuring

Elma 2200X is a re-invention of the voltage tester- again. Elma 2200X offers all the same and clever functions as the well-known Elma 2100X, but the test leads and instrument are en even more rugged quality. Furthermore the instrument can load the point of measurement, to discharge induced voltages, and for simple RCD test, providing a load of 30mA at 230V.

We've never seen so many clever functions in a simple voltage tester, making the instrument suitable for about every task an electrician meet, also when legislation demands to use a tester in compliance with the voltage tester directive.

• Perfect for measuring on charging sockets and charging stands EVSE for electric cars
• Voltagetest, 2 pole with LED 12…1.000V AC/DC
• Voltage measurement with digital display 6…1.000V/1.500V AC/DC
• Continuity
• Resistance 0-1999Ω
• Single pole phase test
• Phase rotation test
• Large and bright display and bright LED's
• Selftest and auto on/off function
• LED warning when dangerous voltage
• Fulfills voltage tester directive
• Very rugged test leads
• Changeable test tips 2/4mm
• Bright torch light

Elma 2200X fulfills IEC 61010-1 KAT IV 600V / IEC 61243-3:2014 and is provided ready to use with batteries and manual.

Elma reinvents the voltage tester, once again, with Elma 2700X.

Elma 2700X has all the same smart features as you know from the Elma x-one, but comes with fixed test leads in extra strong quality, in contrast to the x-one's detachable and extremely thin and flexible cables. In addition, the instrument housing is in a stronger and more solid design, just as you can "feel" the voltage, as Elma 2700X vibrates when measuring voltage.

There have never been so many smart and thought through features in one Instrument. Elma 2700X is a smart multi-tester that combines the voltage tester with an open current clamp, which makes the instrument suitable for most electrical tasks, L-AUS work and detection of voltage-free condition, where it is mandatory to use an instrument that complies with the voltage tester directive.

• Perfect for measuring on charging sockets and charging stands EVSE for electric cars
• Voltage test, 2 poles with LEDs 120… 1,000V AC / DC
• Voltage measurement with digital display 1… 1,000V / 1,500V AC / DC
• Current measurement with slim current clamp 0-200A
• Review test
• Resistance measurement 0-100kΩ
• Pole finder, one-pole voltage test which indicates the phase
• Phase sequence / turn field test, 2 poles for 3 phase networks
• Large clearly lit display and high-efficiency LEDs
• Self-test and auto on / off function
• Diode warning in case of dangerous voltage without battery - for L-AUS work
• Complies with the voltage tester directive for checking the de-energized state
• Very powerful fixed wires with
• Interchangeable test tips 2 / 4mm
• Built-in powerful flashlight
• Delivered including delicious belt bag

Elma 2700X complies with IEC 61010-1 CAT IV 600V / IEC 61243-3: 2014 and comes with batteries, test leads, instructions and smart belt bag.

With Elma X One, Elma is reinventing the voltage tester. Never have there been so many smart and well though out functions in one instrument. Elma X One is a smart true RMS multitester which combines the voltage tester with open current clamps in a very slim design. Suitable for work with the power on.

• Perfect for measuring on charging sockets and charging stands EVSE for electric cars
• Voltage test, 2 pole with LEDs 12...1.000V AC/DC
• True RMS voltage measurement with display 7...1.000V AC/DC
• True RMS current measurement with very slim cucrrent clamps 0-200A
• Resistance measurement 0-50kΩ and continuity test
• Voltage test, 1 pole, indicating phase
• Phase rotation test, 2 pole
• Large clear illuminated display and bright LEDs
• Self-test and auto on/off function
• True voltagetest also without batteries - suitable for work with the power on
• Meets the voltage tester directive for working with the power off
• Very powerfull interchangeable test leads with 4mm standard plug
• Interchangeable test leads tips 2/4mm
• Built-in powerful flashlight
• Comes with handy bag for the belt

Elma X One complies with IEC 61010-1 Cat IV 600V / IEC 61243-3:2014 and comes complete with batteries, test leads, manuel and handy bag
 

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 600 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 600 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 600 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 600 V.

PVF2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

To facilitate connection and disconnection, the MC4 connector is without a locking mechanism.

PVF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVM2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

PVM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVFM2317 is a test lead specially designed for performance measurements on the DC side of solar power systems.

The MC4 connectors allow the cable to be inserted into the DC circuit, e.g., between the panel and the inverter, enabling measurement of operating current with a clampmeter, while the banana plug provides access to voltage measurement.

PVFM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVMF2317 is a test lead specially designed for performance measurements on the DC side of solar power systems.

The MC4 connectors allow the cable to be inserted into the DC circuit, e.g., between the panel and the inverter, enabling measurement of operating current with a clampmeter, while the banana plug provides access to voltage measurement.

PVMF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.