- We've send you an E-mail with your account information
Z200 PV Analyzer - Solar PV testing and fast troubleshooting
Standard Photovoltaic Measurements
- PV string voltage Voc
- PV string current Isc
- PV system isolation resistance Riso
- PV string series resistance Rs
- PV string impedance curves (overall degradation check)
Fault Position measurements
- Position of ground (Riso) faults in PV strings
- Position of disconnect in PV strings
- Tone generator and acoustic pickup for cable tracing (Accessory)
Single Module Measurements
- Module bypass diode check (open or short diode)
- Module shunting resistance (PID and degradation check)
- Module voltage check
Special Software Features
- State machine algorithm to help the user analyse fault scenarios
- Integrated timer function for periodic ground faults
- Build in PDF report generator
More info, registration for webinar and other events directly at Emazys' homepage emazys.com
Specifications and accessories
The Z200 PV Analyzer std. kit includes
Z200 PV Analyzer
Needle pin test cables
Alligator clip test cables
MC4 measuring leads
CALL FOR PRICE +45 7022 1000
Incl. VAT: 15.00 EUR
Elma 106 VoltStick® indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 VoltStick® is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 VoltStick® meets EN 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries.
Incl. VAT: 21.25 EUR
30 years ago Sagab Electronics AB invented the VoltStick® Phasen, making it possible, for the first time ever, to detect and indicate voltage without contact. Now we’re ready to launch the innovative and new VoltStick® Bright. Microprocessor controlled and highest available safety class for clever voltage detection. VoltStick® Bright is always on and ready for use and is the first voltage detector with integrated self test and battery test capability, making it the safest choice for the user, when detecting voltage. Furthermore the VoltStick® Bright is equipped with extremely bright and visible red LED tip and loud and clear acoustic warning when detecting voltage. It doesn’t get any safer, nor easier. The build in LED flashlight illuminates the measuring area in a bright white light while measuring. VoltStick® Bright offers two user selectable ranges, easily changed on the pushbutton. This makes it possible to detect voltage from as low as 20V to 1000V AC. The probe tip is designed to fit into any kind of socket, worldwide and the slim design makes VoltStick® Bright ideal to bring everywhere, even in the pocket of your shirt. VoltStick® Bright is supplied including batteries, multi language manual, is UL and CE approved complying with IEC 1010-1 Cat IV 600V.
Incl. VAT: 27.50 EUR
Elma MagnetStick® is a small and clever "Pen-tool" for test of magnetism without metallic contact. The tip of Elma MagnetStick® is simply placed close to the test point and will light in clear red light, if a magnetic field is present. Indispensable for testing: - Pneumatics and hydraulics - Oil and gas burners - Appliances and white goods
MagnetStick® Stick provides easy and safe testing, without contact with live circuits. Supplied ready to use incl. batteries and test magnet.
Incl. VAT: 30.00 EUR
Incl. VAT: 31.25 EUR
Elma VoltStick® Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma VoltStick® Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma VoltStick® Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards.
Incl. VAT: 32.50 EUR
Elma1500B is a new, small and handy tester with 3 features: - Voltage test 12-690 V AC / DC, 2-pole with LED indication - Test with both audible and visual indication - Phase indication.
The tester has clever testprobes with 19mm spacing to fit directly into most sockets and enables one-hand operation. The instrument has no buttons and switches automatically between the different functions to prevent wrong operation. Elma 1500B uses standard batteries, and to ensure high safety, voltage indication is active even without batteries. Elma 1500B is fulfills IP 54 protection and meet IEC 61010-1 CAT IV 300V and CAT III 690V and EN 61243-3:2010.
Incl. VAT: 46.25 EUR
Incl. VAT: 50.00 EUR
VoltStick® Atex approved proximity voltage detector, indicating the presence of AC voltage without the need for electrical or galvanic connection. A clear and bright orange light indicates when voltage is present. VoltStick® EX is perfect when testing i.e.: Fuses, before they are removed. Child safe sockets without direct access to conductive parts. Cables and leads, find the break through the insulation. Serial connected light chains, find the faulty bulb. Elma VoltStick® EX fulfills IEC 1010-1 CAT III 1000V, EX: II 2G EEX ib IIC T4 and Nemko 03ATEX1456. Provided ready to use incl. Manual and batteries.
Incl. VAT: 55.00 EUR
Incl. VAT: 61.25 EUR
Incl. VAT: 66.25 EUR
Elma MagnetStick® EX 702-62EX is ATEX approved for EX Zones and is a small and clever "Pen-tool" for test of magnetism without metallic contact. The tip of Elma MagnetStick® EX is simply placed close to the test point and will light in clear red light, if a magnetic field is present. Indispensable for testing: - Pneumatics and hydraulics - Oil and gas burners - Appliances and white goods
Elma MagnetStick® EX provides easy and safe testing, without contact with live circuits. Supplied ready to use incl. batteries and test magnet.
Incl. VAT: 80.00 EUR
Incl. VAT: 83.75 EUR
Incl. VAT: 100.00 EUR
Incl. VAT: 111.25 EUR
Elma BM031 is a handy and small clamp multimeter that measures True RMS AC current. Using the instrument it is possible to measure currents as high as 600A AC and the multimeter function provides measurements of voltage, resistance and continuity. The AmpTip function offer the possibility to measure current from 0-60A with extra high accuracy.
Elma BM031 is equipped with back lit display, min/max/rel, datahold peak hold and voltage detection. Elma BM031 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is provided ready to use in bag incl. test leads, battery and user manual.
Incl. VAT: 115.00 EUR
Incl. VAT: 117.50 EUR
Incl. VAT: 120.00 EUR
© 2016 Elma Instruments. All Rights Reserved.
Sign up for our exciting newsletter and receive offers and news early.
All you need to do is to fill in the below form.