Accessories – Solar measurement

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

PVF2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

To facilitate connection and disconnection, the MC4 connector is without a locking mechanism.

PVF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVM2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

PVM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVFM2317 is a test lead specially designed for performance measurements on the DC side of solar power systems.

The MC4 connectors allow the cable to be inserted into the DC circuit, e.g., between the panel and the inverter, enabling measurement of operating current with a clampmeter, while the banana plug provides access to voltage measurement.

PVFM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVMF2317 is a test lead specially designed for performance measurements on the DC side of solar power systems.

The MC4 connectors allow the cable to be inserted into the DC circuit, e.g., between the panel and the inverter, enabling measurement of operating current with a clampmeter, while the banana plug provides access to voltage measurement.

PVMF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.