Humidity in Buildingmaterials

Elma DT125 is an instrument with penetration electrodes for moisture measurement in building materials, primarely soft materiels, such as wood, gypsum etc. In the manual more than 100 different types of wood, and almost 20 different building materials are diveded into gruops, which can be selected under configuration of the instrument. The instrument gives the result in the unit "mass-%", and is in relation to the dry mass of the material. Besides this the instrument measures the relative air humidity, and thus of course the air temperature.

In accordance to the task, it’s possible to acquire a set of probes for measurements deeper in the material, as well behind list and more.

The instrument is indispensable for the builder, moisture technician, engineer and others who work with renovation and water damage control. Elma DT125 also measures the air humidity and temperature, and is provided with a large illuminated combi display. You can set wet / dry limit, material selection, automatic calibration, min/max and auto power off function.

The instrument comes with the built-in needle electrodes incl. batteries and an instruction manual. Available as accessory is a complete suitcase, incl. a hammer electrode with 2 different length of needles(30 and 150mm), a probe designed for measuring behind list's, and finally an external needele probe with handle extensions.

Elma DT128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures in a depht of 20-40mm in the material. Just hold the ball-tip against the surface and the moisture level is immediately shown in the large, backlit display. Elma DT128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use, incl batteries and manual.

Note: The material to be measured must be at least 20-40mm thickness to provide a valid reading.

Bun Hygro X+ is a super precise hygrometer, with a temperature deviation of ± 0.2 and relative airiness of ± 1.5%, the external probe is IP54. ideal where the small fluctuations can mean something, such as preservation or dry storage.

All the Bun products are easy use wi-fi. Adjustable upload and log interval provides the possibility of ultra-long battery life. It provides a good overview, and it is possible to share to several and different alarm intervals on different devices. Bun helps you with the best overview, which makes it the perfect tool for collecting data over time.

It can send emails, text messages and more. You have access to the history, graphs and periodic reports on any platform.Reports and graphs can also be extracted with just a few clicks.

Free version and subscription solution, contact us to hear more.

Instead of sticking a finger in the ground, you can use a Bun agribun. It helps to keep track of your soil and can help to see when the temperature and moisture in the soil are optimal.

All the Bun products are easy use wi-fi. Adjustable upload and log interval provides the possibility of ultra-long battery life. It provides a good overview, and it is possible to share to several and different alarm intervals on different devices.

Bun helps you with the best overview, which makes it the perfect tool for collecting data over time. It can send emails, text messages and more.You have access to the history, graphs and periodic reports on any platform. Reports and graphs can also be extracted with just a few clicks.

Free version and subscription solution, contact us to hear more.