X-tra accessories

Glycerin filling of analogue manometers for stabilization of pointers and pressure compensation. Used as needed. Must be ordered together with pressure gauges for filling in the Elma service center before dispatch.

Fuse 6x32mm, 10kA/1000V for e.g. Elma BM2805

Elma multimeter magnet is very strong. You can hang your multimeter on a blackboard or  on other metal objects. The magnet comes with both a strong velcro strap and a thin string which means that the system can be used with most multimeters on the market.

Voltstick® Pro 12, with the unique fork shape tip, provides excellent selectivity, with max sensitivity when the wire or cable is places in the fork tip. When outside the tip, the sensitivity is low, minimizing the affects of external noise. Voltstick® Pro 12 provides extra high sensitivity, but will only indicate 12-24VAC, is placed in the fork shaped tip. Indication of higher voltages outside the tip can occur.

The wire or cable under test is placed between in the fork shaped tip for measurement. To test cables with larger diameter than the tip, the supplied adapter ust be used. The adapter is to be found under the battery cover.

• Unique and patented, fork shaped tip, for high selectivity and minimized risk of wrong indication
• Separate wires can easily be measured, also in the stuffed fuse board og junction box
• Powerful, red light on the tip, indicates detection
• Fully insulated for high safety

The instrument is provided ready to use, including batteries and fulfills safety IEC61010 CAT III 1000V

Voltstick® Pro 230, with the unique fork shape tip, provides excellent selectivity, with max sensitivity when the wire or cable is places in the fork tip. When outside the tip, the sensitivity is low, minimizing the affects of external noise. 

The wire or cable under test is placed between in the fork shaped tip for measurement. To test cables with larger diameter than the tip, the supplied adapter ust be used. The adapter is to be found under the battery cover.

• Unique and patented, fork shaped tip, for high selectivity and minimized risk of wrong indication
• Separate wires can easily be measured, also in the stuffed fuse board og junction box
• Powerful, red light on the tip, indicates detection
• Fully insulated for high safety

The instrument is provided ready to use, including batteries and fulfills safety IEC61010 CAT III 1000V

Traceable Calibration 

Traceable Calibration

Do you know how accurate your measurements are?

It is important that you can document the accuracy of your instrument.

Let Elma Instruments perform traceable calibration - then you are safe.

To make sure that your instrument always is measures correct and accurate, we recommend that it is calibrated once a year. When you submit a calibration instrument to Elma Instruments, we undergo the following procedures:

• Review and control of the entire instrument.

• Firmware update (instrument software).

• Calibration according to the manufacturer's instructions.

• Issuance of certificate.

• Instrument registration and recall management.

You are always welcome to contact us if you have any questions.

Email: service@elma.dk

Phone: 7022 1000 - Press 3

Traceable Calibration

Do you know how accurate your measurements are?

It is important that you can document the accuracy of your instrument.

Let Elma Instruments perform traceable calibration - then you are safe.

To make sure that your instrument always is measures correct and accurate, we recommend that it is calibrated once a year. When you submit a calibration instrument to Elma Instruments, we undergo the following procedures:

• Review and control of the entire instrument.

• Firmware update (instrument software).

• Calibration according to the manufacturer's instructions.

• Issuance of certificate.

• Instrument registration and recall management.

You are always welcome to contact us if you have any questions.

Email: service@elma.dk

Phone: 7022 1000 - Press 3

Traceable Calibration

Do you know how accurate your measurements are?

It is important that you can document the accuracy of your instrument.

Let Elma Instruments perform traceable calibration - then you are safe.

To make sure that your instrument always is measures correct and accurate, we recommend that it is calibrated once a year. When you submit a calibration instrument to Elma Instruments, we undergo the following procedures:

• Review and control of the entire instrument.

• Firmware update (instrument software).

• Calibration according to the manufacturer's instructions.

• Issuance of certificate.

• Instrument registration and recall management.

You are always welcome to contact us if you have any questions.

Email: service@elma.dk

Phone: 7022 1000 - Press 3

Traceable Calibration

Do you know how accurate your measurements are?

It is important that you can document the accuracy of your instrument.

Let Elma Instruments perform traceable calibration - then you are safe.

To make sure that your instrument always is measures correct and accurate, we recommend that it is calibrated once a year. When you submit a calibration instrument to Elma Instruments, we undergo the following procedures:

• Review and control of the entire instrument.

• Firmware update (instrument software).

• Calibration according to the manufacturer's instructions.

• Issuance of certificate.

• Instrument registration and recall management.

You are always welcome to contact us if you have any questions.

Email: service@elma.dk

Phone: 7022 1000 - Press 3

Traceable Calibration

If you want calibration of your current installation tester you can order it through: rma.elma.dk

Do you know how accurate your measurements are?

It is important that you can document the accuracy of your instrument.

Let Elma Instruments perform traceable calibration - then you are safe.

To make sure that your instrument always is measures correct and accurate, we recommend that it is calibrated once a year. When you submit a calibration instrument to Elma Instruments, we undergo the following procedures:

• Review and control of the entire instrument.

• Firmware update (instrument software).

• Calibration according to the manufacturer's instructions.

• Issuance of certificate.

• Instrument registration and recall management.

You are always welcome to contact us if you have any questions.

Email: service@elma.dk

Phone: 7022 1000 - Press 3