- We've send you an E-mail with your account information
Incl. VAT: 16.25 EUR
Incl. VAT: 21.25 EUR
Incl. VAT: 32.50 EUR
Incl. VAT: 51.25 EUR
Incl. VAT: 57.50 EUR
Incl. VAT: 66.25 EUR
Incl. VAT: 68.75 EUR
Incl. VAT: 71.25 EUR
Incl. VAT: 81.25 EUR
Incl. VAT: 83.75 EUR
Incl. VAT: 100.00 EUR
The ElmaLOG 181 series, we dare to say, is the easiest datalogger in the world. The logging is started with the push of a button. When plugged in the USB of a computer, the PDF and Spreadsheet (DBF) rapport ready in the instrument, which now works as a simple USB storage. ElmaLOG181TH is a temperature and moist logger. The ElmaLOG 181TH is provided with real time clock and memory for 60,000 logs in the memory. It's also possible to program an advanced logging using the free software (Find it in the "Download" tab). This will enable user selectable alarm limits, editable log interval etc. ElmaLOG 181TH is provided ready to use incl. wallmount, manual and battery.
Elma DT125 is an instrument with penetration electrodes for moisture measurement in building materials, primarely soft materiels, such as wood, gypsum etc. In the manual more than 100 different types of wood, and almost 20 different building materials are diveded into gruops, which can be selected under configuration of the instrument. The instrument gives the result in the unit "mass-%", and is in relation to the dry mass of the material. Besides this the instrument measures the relative air humidity, and thus of course the air temperature.
In accordance to the task, it’s possible to acquire a set of probes for measurements deeper in the material, as well behind list and more.
The instrument is indispensable for the builder, moisture technician, engineer and others who work with renovation and water damage control. Elma DT125 also measures the air humidity and temperature, and is provided with a large illuminated combi display. You can set wet / dry limit, material selection, automatic calibration, min/max and auto power off function.
The instrument comes with the built-in needle electrodes incl. batteries and an instruction manual. Available as accessory is a complete suitcase, incl. a hammer electrode with 2 different length of needles(30 and 150mm), a probe designed for measuring behind list's, and finally an external needele probe with handle extensions.
Incl. VAT: 130.00 EUR
Rugged, digital two channel difference measurement thermometer, for simultaneous measurement of one or two temperatures using type K thermocouples.
The user friendly operation offers easy access to change displays, T1 and T2, Difference, max/min/avg, hold, and °C/°F/K and back light. Resolution of 0,1°C or 1°C depending on scale.When in max/min/avg mode, the instrument will continiously update the highest, lowest and average temperature (average of max 9h 40m). A clock will indicate how long the duration of the max/min/avg. mode.
Note that the instrument accuracy does not take sensor accuracy into account.
Elma 712 is supplied ready to use, incl. protective rubber jacket, batteries, type k wire sensor and manual.
Incl. VAT: 167.50 EUR
Elma DT128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures in a depht of 20-40mm in the material. Just hold the ball-tip against the surface and the moisture level is immediately shown in the large, backlit display. Elma DT128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use, incl batteries and manual.
Note: The material to be measured must be at least 20-40mm thickness to provide a valid reading.
Incl. VAT: 183.75 EUR
Incl. VAT: 201.25 EUR
Incl. VAT: 217.50 EUR
© 2016 Elma Instruments. All Rights Reserved.
Sign up for our exciting newsletter and receive offers and news early.
All you need to do is to fill in the below form.